How To Create Load Balancer In Aws Step By Step

Create a Classic Load Balancer with an HTTPS listener

A load balancer takes requests from clients and distributes them across the EC2 instances that are registered with the load balancer.

You can create a load balancer that listens on both the HTTP (80) and HTTPS (443) ports. If you specify that the HTTPS listener sends requests to the instances on port 80, the load balancer terminates the requests and communication from the load balancer to the instances is not encrypted. If the HTTPS listener sends requests to the instances on port 443, communication from the load balancer to the instances is encrypted.

If your load balancer uses an encrypted connection to communicate with the instances, you can optionally enable authentication of the instances. This ensures that the load balancer communicates with an instance only if its public key matches the key that you specified to the load balancer for this purpose.

For information about adding an HTTPS listener to an existing load balancer, see Configure an HTTPS listener for your Classic Load Balancer.

Prerequisites

Before you get started, be sure that you've met the following prerequisites:

Complete the steps in Prepare your VPC and EC2 instances.
Launch the EC2 instances that you plan to register with your load balancer. The security groups for these instances must allow traffic from the load balancer.
The EC2 instances must respond to the target of the health check with an HTTP status code 200. For more information, see Configure health checks for your Classic Load Balancer.
If you plan to enable the keep-alive option on your EC2 instances, we recommend that you set the keep-alive settings to at least the idle timeout settings of your load balancer. If you want to ensure that the load balancer is responsible for closing the connections to your instance, make sure that the value set on your instance for the keep-alive time is greater than the idle timeout setting on your load balancer. For more information, see Configure the idle connection timeout for your Classic Load Balancer.
If you create a secure listener, you must deploy an SSL server certificate on your load balancer. The load balancer uses the certificate to terminate and then decrypt requests before sending them to the instances. If you don't have an SSL certificate, you can create one. For more information, see SSL/TLS certificates for Classic Load Balancers.

Create an HTTPS/SSL load balancer using the console

To create an HTTPS/SSL load balancer, complete the following tasks.

Step 1: Define your load balancer

First, provide some basic configuration information for your load balancer, such as a name, a network, and one or more listeners.

A listener is a process that checks for connection requests. It is configured with a protocol and a port for front-end (client to load balancer) connections and a protocol and a port for back-end (load balancer to instance) connections. For information about the ports, protocols, and listener configurations supported by Elastic Load Balancing, see Listeners for your Classic Load Balancer.

In this example, you configure two listeners for your load balancer. The first listener accepts HTTP requests on port 80 and sends them to the instances on port 80 using HTTP. The second listener accepts HTTPS requests on port 443 and sends them to the instances using HTTP on port 80 (or using HTTPS on port 443 if you want to configure back-end instance authentication).

To define your load balancer

Open the Amazon EC2 console at https://console.aws.amazon.com/ec2/ .
On the navigation pane, under LOAD BALANCING, choose Load Balancers.
Choose Create Load Balancer.
For Select load balancer type, choose Classic Load Balancer.
For Load Balancer name, type a name for your load balancer.

The name of your Classic Load Balancer must be unique within your set of Classic Load Balancers for the region, can have a maximum of 32 characters, can contain only alphanumeric characters and hyphens, and must not begin or end with a hyphen.
For Create LB inside, select the same network that you selected for your instances: EC2-Classic or a specific VPC.
[Default VPC] If you selected a default VPC and would like to choose the subnets for your load balancer, select Enable advanced VPC configuration.
For Listener Configuration, leave the default listener, and choose Add to add another listener. For Load Balancer Protocol for the new listener, select HTTPS (Secure HTTP). This updates Load Balancer Port, Instance Protocol, and Instance Port.

By default, Instance Protocol is HTTP and Instance Port is 80.

If you want to set up back-end instance authentication (later, in Step 3: Configure security settings), change the instance protocol to HTTPS (Secure HTTP). This also updates Instance Port.
[EC2-VPC] For Available subnets, select at least one available subnet using its add icon. The subnets are moved under Selected subnets. To improve the availability of your load balancer, select subnets from more than one Availability Zone.

If you selected EC2-Classic as your network, or you have a default VPC but did not select Enable advanced VPC configuration, you do not see the user interface to select subnets.

You can add at most one subnet per Availability Zone. If you select a second subnet from an Availability Zone where there is already a selected subnet, this subnet replaces the currently selected subnet for that Availability Zone.
Choose Next: Assign Security Groups.

Step 2: Assign security groups to your load balancer in a VPC

If you selected a VPC as your network, you must assign your load balancer a security group that allows inbound traffic to the ports that you specified for your load balancer and the health checks for your load balancer.

If you selected EC2-Classic as your network, you can continue to the next step. By default, Elastic Load Balancing provides a security group for load balancers in EC2-Classic.

To assign security group to your load balancer

On the Assign Security Groups page, select Create a new security group.
Type a name and description for your security group, or leave the default name and description. This new security group contains a rule that allows traffic to the ports that you configured your load balancer to use.
Choose Next: Configure Security Settings.

Step 3: Configure security settings

When you use HTTPS or SSL for your front-end listener, you must deploy an SSL certificate on your load balancer. The load balancer uses the certificate to terminate the connection and then decrypt requests from clients before sending them to the instances.

You must also specify a security policy. Elastic Load Balancing provides security policies that have predefined SSL negotiation configurations, or you can create your own custom security policy.

If you configured HTTPS/SSL on the back-end connection, you can enable authentication of your instances.

To configure security settings

For Select Certificate, do one of the following:
- If you created or imported a certificate using AWS Certificate Manager, select Choose an existing certificate from AWS Certificate Manager (ACM), and then select the certificate from Certificate.
- If you imported a certificate using IAM, select Choose an existing certificate from AWS Identity and Access Management (IAM), and then select your certificate from Certificate.
- If you have a certificate to import but ACM is not available in your Region, select Upload a new SSL Certificate to AWS Identity and Access Management (IAM). Type the name of the certificate. In Private Key, copy and paste the contents of the private key file (PEM-encoded). In Public Key Certificate, copy and paste the contents of the public key certificate file (PEM-encoded). In Certificate Chain, copy and paste the contents of the certificate chain file (PEM-encoded), unless you are using a self-signed certificate and it's not important that browsers implicitly accept the certificate.
For Select a Cipher, verify that Predefined Security Policy is selected and set to ELBSecurityPolicy-2016-08. We recommend that you always use the latest predefined security policy. If you need to use a different predefined security policy or create a custom policy, see Update the SSL Negotiation Configuration.
(Optional) If you configured the HTTPS listener to communicate with instances using an encrypted connection, you can optionally set up authentication of the instances.
1. For Backend Certificate, select Enable backend authentication.
  
  If you do not see the Backend Certificate section, go back to Listener Configuration and select HTTPS (Secure HTTP) for Instance Protocol.
2. For Certificate name, type the name of the public key certificate.
3. For Certificate Body (pem encoded), copy and paste the contents of the certificate. The load balancer communicates with an instance only if its public key matches this key.
4. To add another certificate, choose Add another backend certificate.
Choose Next: Configure Health Check.

Step 4: Configure health checks

Elastic Load Balancing automatically checks the health of the registered EC2 instances for your load balancer. If Elastic Load Balancing finds an unhealthy instance, it stops sending traffic to the instance and reroutes traffic to the healthy instances. For more information about configuring health checks, see Configure health checks for your Classic Load Balancer.

To configure health checks for your instances

On the Configure Health Check page, select a ping protocol and ping port. Your EC2 instances must accept the specified traffic on the specified ping port.
For Ping Path, replace the default value with a single forward slash ("/"). This tells Elastic Load Balancing to send health check requests to the default home page for your web server, such as index.html.
Keep the other settings at their default values.
Choose Next: Add EC2 Instances.

Step 5: Register EC2 instances with your load balancer

Your load balancer distributes traffic between the instances that are registered to it. You can select EC2 instances in a single Availability Zone or multiple Availability Zones within the same Region as the load balancer. For more information, see Registered instances for your Classic Load Balancer.

When you register an instance with an elastic network interface (ENI) attached, the load balancer routes traffic to the primary IP address of the primary interface (eth0) of the instance.

To register EC2 instances with your load balancer

On the Add EC2 Instances page, select the instances to register with your load balancer.
Leave cross-zone load balancing and connection draining enabled.
Choose Next: Add Tags.

Step 6: Tag your load balancer (optional)

You can tag your load balancer, or continue to the next step.

To add tags to your load balancer

On the Add Tags page, specify a key and a value for the tag.
To add another tag, choose Create Tag and specify a key and a value for the tag.
After you are finished adding tags, choose Review and Create.

Step 7: Create and verify your load balancer

Before you create the load balancer, review the settings that you selected. After creating the load balancer, you can verify that it's sending traffic to your EC2 instances.

To create and test your load balancer

On the Review page, check your settings. If you need to make changes, choose the corresponding link to edit the settings.
Choose Create.
After you are notified that your load balancer was created, choose Close.
Select your new load balancer.
On the Description tab, check the Status row. If it indicates that some of your instances are not in service, its probably because they are still in the registration process. For more information, see Troubleshoot a Classic Load Balancer: Instance registration.
(Optional) After at least one of your EC2 instances is in service, you can test your load balancer. Copy the string from DNS name (for example, my-load-balancer-1234567890.us-west-2.elb.amazonaws.com) and paste it into the address field of an internet-connected web browser. If your load balancer is working, you see the default page of your server.

Step 8: Delete your load balancer (optional)

As soon as your load balancer becomes available, you are billed for each hour or partial hour that you keep it running. When you no longer need a load balancer, you can delete it. As soon as the load balancer is deleted, you stop incurring charges for it.

To delete your load balancer

Open the Amazon EC2 console at https://console.aws.amazon.com/ec2/ .
On the navigation pane, under LOAD BALANCING, choose Load Balancers.
Select the load balancer.
Choose Actions, Delete.
When prompted for confirmation, choose Yes, Delete.
(Optional) After you delete a load balancer, the EC2 instances associated with the load balancer continue to run, and you are billed for each hour or partial hour that you keep them running. For information about stopping or terminating your instances, see Stop and start your instance or Terminate your instance in the Amazon EC2 User Guide for Linux Instances.

Create an HTTPS/SSL load balancer using the AWS CLI

Use the following instructions to create an HTTPS/SSL load balancer using the AWS CLI.

Step 1: Configure listeners

A listener is a process that checks for connection requests. It is configured with a protocol and a port for front-end (client to load balancer) connections and a protocol and port for back-end (load balancer to instance) connections. For information about the ports, protocols, and listener configurations supported by Elastic Load Balancing, see Listeners for your Classic Load Balancer.

In this example, you configure two listeners for your load balancer by specifying the ports and protocols to use for front-end and back-end connections. The first listener accepts HTTP requests on port 80 and sends the requests to the instances on port 80 using HTTP. The second listener accepts HTTPS requests on port 443 and sends requests to instances using HTTP on port 80.

Because the second listener uses HTTPS for the front-end connection, you must deploy an SSL sever certificate on your load balancer. The load balancer uses the certificate to terminate and then decrypt requests before sending them to the instances.

To configure listeners for your load balancer

Get the Amazon Resource Name (ARN) of the SSL certificate. For example:

ACM

                arn:aws:acm:region:123456789012:certificate/12345678-1234-1234-1234-123456789012

IAM

                arn:aws:iam::123456789012:server-certificate/my-server-certificate

Use the following create-load-balancer command to configure the load balancer with the two listeners:

                                  aws elb create-load-balancer --load-balancer-name                    my-load-balancer                    --listeners "Protocol=http,LoadBalancerPort=80,InstanceProtocol=http,InstancePort=80" "Protocol=https,LoadBalancerPort=443,InstanceProtocol=http,InstancePort=80,SSLCertificateId="ARN" --availability-zones                    us-west-2a

The following is an example response:

                                  {                  "DNSName": "my-loadbalancer-012345678.us-west-2.elb.amazonaws.com" }

(Optional) Use the following describe-load-balancers command to view the details of your load balancer:

                                  aws elb describe-load-balancers --load-balancer-name                    my-load-balancer

Step 2: Configure the SSL security policy

You can select one of the predefined security policies, or you can create your own custom security policy. Otherwise, Elastic Load Balancing configures your load balancer with the default predefined security policy, ELBSecurityPolicy-2016-08. We recommend that you use the default security policy. For more information about security policies, see SSL negotiation configurations for Classic Load Balancers.

To verify that your load balancer is associated with the default security policy

Use the following describe-load-balancers command:

                      aws elb describe-load-balancers --load-balancer-name              my-loadbalancer

The following is an example response. Note that ELBSecurityPolicy-2016-08 is associated with the load balancer on port 443.

                      {            "LoadBalancerDescriptions": [            {            ...             "ListenerDescriptions": [            {            "Listener":            {            "InstancePort": 80,                          "SSLCertificateId": "ARN",                          "LoadBalancerPort": 443,                          "Protocol": "HTTPS",                          "InstanceProtocol": "HTTP"                     },                      "PolicyNames": [                         "ELBSecurityPolicy-2016-08"                     ]                 },            {            "Listener":            {            "InstancePort": 80,                          "LoadBalancerPort": 80,                          "Protocol": "HTTP",                          "InstanceProtocol": "HTTP"                     },                      "PolicyNames": []                 }             ],             ...         }     ] }

If you prefer, you can configure the SSL security policy for your load balancer instead of using the default security policy.

(Optional) to use a predefined SSL security policy

Use the following describe-load-balancer-policies command to list the names of the predefined security policies:
```
                                  aws elb describe-load-balancer-policies                              
```
For information about the configuration for the predefined security policies, see Predefined SSL security policies.

Use the following create-load-balancer-policy command to create an SSL negotiation policy using one of the predefined security policies that you described in the previous step:

                                  aws elb create-load-balancer-policy --load-balancer-name                    my-loadbalancer                    --policy-name                    my-SSLNegotiation-policy                    --policy-type-name SSLNegotiationPolicyType  --policy-attributes AttributeName=Reference-Security-Policy,AttributeValue=predefined-policy

(Optional) Use the following describe-load-balancer-policies command to verify that the policy is created:

                                  aws elb describe-load-balancer-policies --load-balancer-name                    my-loadbalancer                    --policy-name                    my-SSLNegotiation-policy

The response includes the description of the policy.

Use the following set-load-balancer-policies-of-listener command to enable the policy on load balancer port 443:
```
                                  aws elb set-load-balancer-policies-of-listener --load-balancer-name                    my-loadbalancer                    --load-balancer-port 443 --policy-names                    my-SSLNegotiation-policy                                                
```
The set-load-balancer-policies-of-listener command replaces the current set of policies for the specified load balancer port with the specified set of policies. The --policy-names list must include all policies to be enabled. If you omit a policy that is currently enabled, it is disabled.

(Optional) Use the following describe-load-balancers command to verify that the policy is enabled:

                                  aws elb describe-load-balancers --load-balancer-name                    my-loadbalancer

The following is an example response showing that the policy is enabled on port 443.

                                  {                  "LoadBalancerDescriptions": [                  {                  ....             "ListenerDescriptions": [                  {                  "Listener":                  {                  "InstancePort": 80,                          "SSLCertificateId": "ARN",                          "LoadBalancerPort": 443,                          "Protocol": "HTTPS",                          "InstanceProtocol": "HTTP"                     },                      "PolicyNames": [                         "my-SSLNegotiation-policy"                     ]                 },                  {                  "Listener":                  {                  "InstancePort": 80,                          "LoadBalancerPort": 80,                          "Protocol": "HTTP",                          "InstanceProtocol": "HTTP"                     },                      "PolicyNames": []                 }             ],             ...         }     ] }

When you create a custom security policy, you must enable at least one protocol and one cipher. The DSA and RSA ciphers are specific to the signing algorithm and are used to create the SSL certificate. If you already have your SSL certificate, make sure to enable the cipher that was used to create your certificate. The name of your custom policy must not begin with ELBSecurityPolicy- or ELBSample-, as these prefixes are reserved for the names of the predefined security policies.

(Optional) to use a custom SSL security policy

Use the create-load-balancer-policy command to create an SSL negotiation policy using a custom security policy. For example:

                                  aws elb create-load-balancer-policy --load-balancer-name                    my-loadbalancer                    --policy-name                    my-SSLNegotiation-policy                    --policy-type-name SSLNegotiationPolicyType   --policy-attributes AttributeName=Protocol-TLSv1.2,AttributeValue=true   AttributeName=Protocol-TLSv1.1,AttributeValue=true   AttributeName=DHE-RSA-AES256-SHA256,AttributeValue=true   AttributeName=Server-Defined-Cipher-Order,AttributeValue=true

(Optional) Use the following describe-load-balancer-policies command to verify that the policy is created:

                                  aws elb describe-load-balancer-policies --load-balancer-name                    my-loadbalancer                    --policy-name                    my-SSLNegotiation-policy

The response includes the description of the policy.

Use the following set-load-balancer-policies-of-listener command to enable the policy on load balancer port 443:
```
                                  aws elb set-load-balancer-policies-of-listener --load-balancer-name                    my-loadbalancer                    --load-balancer-port 443 --policy-names                    my-SSLNegotiation-policy                                                
```
The set-load-balancer-policies-of-listener command replaces the current set of policies for the specified load balancer port with the specified set of policies. The --policy-names list must include all policies to be enabled. If you omit a policy that is currently enabled, it is disabled.

(Optional) Use the following describe-load-balancers command to verify that the policy is enabled:

                                  aws elb describe-load-balancers --load-balancer-name                    my-loadbalancer

The following is an example response showing that the policy is enabled on port 443.

                                  {                  "LoadBalancerDescriptions": [                  {                  ....             "ListenerDescriptions": [                  {                  "Listener":                  {                  "InstancePort": 80,                          "SSLCertificateId": "ARN",                          "LoadBalancerPort": 443,                          "Protocol": "HTTPS",                          "InstanceProtocol": "HTTP"                     },                      "PolicyNames": [                         "my-SSLNegotiation-policy"                     ]                 },                  {                  "Listener":                  {                  "InstancePort": 80,                          "LoadBalancerPort": 80,                          "Protocol": "HTTP",                          "InstanceProtocol": "HTTP"                     },                      "PolicyNames": []                 }             ],             ...         }     ] }

Step 3: Configure back-end instance authentication (optional)

If you set up HTTPS/SSL on the back-end connection, you can optionally set up authentication of your instances.

When you set up back-end instance authentication, you create a public key policy. Next, you use this public key policy to create a back-end instance authentication policy. Finally, you set the back-end instance authentication policy with the instance port for the HTTPS protocol.

The load balancer communicates with an instance only if the public key that the instance presents to the load balancer matches a public key in the authentication policy for your load balancer.

To configure back-end instance authentication

Use the following command to retrieve the public key:

                                  openssl x509 -in                    your X509 certificate PublicKey                    -pubkey -noout

Use the following create-load-balancer-policy command to create a public key policy:

                                  aws elb create-load-balancer-policy --load-balancer-name                    my-loadbalancer                    --policy-name                    my-PublicKey-policy                    \ --policy-type-name PublicKeyPolicyType --policy-attributes AttributeName=PublicKey,AttributeValue=                  MIICiTCCAfICCQD6m7oRw0uXOjANBgkqhkiG9w  0BAQUFADCBiDELMAkGA1UEBhMCVVMxCzAJBgNVBAgTAldBMRAwDgYDVQQHEwdTZ  WF0dGxlMQ8wDQYDVQQKEwZBbWF6b24xFDASBgNVBAsTC0lBTSBDb25zb2xlMRIw  EAYDVQQDEwlUZXN0Q2lsYWMxHzAdBgkqhkiG9w0BCQEWEG5vb25lQGFtYXpvbi5  jb20wHhcNMTEwNDI1MjA0NTIxWhcNMTIwNDI0MjA0NTIxWjCBiDELMAkGA1UEBh  MCVVMxCzAJBgNVBAgTAldBMRAwDgYDVQQHEwdTZWF0dGxlMQ8wDQYDVQQKEwZBb  WF6b24xFDASBgNVBAsTC0lBTSBDb25zb2xlMRIwEAYDVQQDEwlUZXN0Q2lsYWMx  HzAdBgkqhkiG9w0BCQEWEG5vb25lQGFtYXpvbi5jb20wgZ8wDQYJKoZIhvcNAQE  BBQADgY0AMIGJAoGBAMaK0dn+a4GmWIWJ21uUSfwfEvySWtC2XADZ4nB+BLYgVI  k60CpiwsZ3G93vUEIO3IyNoH/f0wYK8m9TrDHudUZg3qX4waLG5M43q7Wgc/MbQ  ITxOUSQv7c7ugFFDzQGBzZswY6786m86gpEIbb3OhjZnzcvQAaRHhdlQWIMm2nr  AgMBAAEwDQYJKoZIhvcNAQEFBQADgYEAtCu4nUhVVxYUntneD9+h8Mg9q6q+auN  KyExzyLwaxlAoo7TJHidbtS4J5iNmZgXL0FkbFFBjvSfpJIlJ00zbhNYS5f6Guo  EDmFJl0ZxBHjJnyp378OD8uTs7fLvjx79LjSTbNYiytVbZPQUQ5Yaxu2jXnimvw  3rrszlaEXAMPLE=

To specify a public key value for --policy-attributes, remove the first and last lines of the public key (the line containing "-----BEGIN PUBLIC KEY-----" and the line containing "-----END PUBLIC KEY-----"). The AWS CLI does not accept white space characters in --policy-attributes.

Use the following create-load-balancer-policy command to create a back-end instance authentication policy using my-PublicKey-policy.

                                  aws elb create-load-balancer-policy --load-balancer-name                    my-loadbalancer                    --policy-name                    my-authentication-policy                    --policy-type-name BackendServerAuthenticationPolicyType --policy-attributes AttributeName=PublicKeyPolicyName,AttributeValue=my-PublicKey-policy

You can optionally use multiple public key policies. The load balancer tries all the keys, one at a time. If the public key presented by an instance matches one of these public keys, the instance is authenticated.

Use the following set-load-balancer-policies-for-backend-server command to set my-authentication-policy to the instance port for HTTPS. In this example, the instance port is port 443.

                                  aws elb set-load-balancer-policies-for-backend-server --load-balancer-name                    my-loadbalancer                    --instance-port 443 --policy-names                    my-authentication-policy

(Optional) Use the following describe-load-balancer-policies command to list all the policies for your load balancer:

                                  aws elb describe-load-balancer-policies --load-balancer-name                    my-loadbalancer

(Optional) Use the following describe-load-balancer-policies command to view details of the policy:

                                  aws elb describe-load-balancer-policies --load-balancer-name                    my-loadbalancer                    --policy-names                    my-authentication-policy

Step 4: Configure health checks (optional)

Elastic Load Balancing regularly checks the health of each registered EC2 instance based on the health checks that you configured. If Elastic Load Balancing finds an unhealthy instance, it stops sending traffic to the instance and routes traffic to the healthy instances. For more information, see Configure health checks for your Classic Load Balancer.

When you create your load balancer, Elastic Load Balancing uses default settings for the health checks. If you prefer, you can change the health check configuration for your load balancer instead of using the default settings.

To configure the health checks for your instances

Use the following configure-health-check command:

                      aws elb configure-health-check --load-balancer-name              my-loadbalancer              --health-check Target=HTTP:80/ping,Interval=30,UnhealthyThreshold=2,HealthyThreshold=2,Timeout=3

The following is an example response:

                      {            "HealthCheck":            {            "HealthyThreshold": 2,         "Interval": 30,         "Target": "HTTP:80/ping",         "Timeout": 3,         "UnhealthyThreshold": 2     } }

Step 5: Register EC2 instances

After you create your load balancer, you must register your EC2 instances with the load balancer. You can select EC2 instances from a single Availability Zone or multiple Availability Zones within the same Region as the load balancer. For more information, see Registered instances for your Classic Load Balancer.

Use the register-instances-with-load-balancer command as follows:

                      aws elb register-instances-with-load-balancer --load-balancer-name              my-loadbalancer              --instances              i-4f8cf126 i-0bb7ca62

The following is an example response:

                      {            "Instances": [            {            "InstanceId": "i-4f8cf126"         },            {            "InstanceId": "i-0bb7ca62"         }     ] }

Step 6: Verify the instances

Your load balancer is usable as soon as any one of your registered instances is in the InService state.

To check the state of your newly registered EC2 instances, use the following describe-instance-health command:

                      aws elb describe-instance-health  --load-balancer-name              my-loadbalancer              --instances              i-4f8cf126 i-0bb7ca62

The following is an example response:

                      {            "InstanceStates": [            {            "InstanceId": "i-4f8cf126",              "ReasonCode": "N/A",              "State": "InService",              "Description": "N/A"         },            {            "InstanceId": "i-0bb7ca62",              "ReasonCode": "Instance",              "State": "OutOfService",              "Description": "Instance registration is still in progress"         }     ] }

If the State field for an instance is OutOfService, it's probably because your instances are still registering. For more information, see Troubleshoot a Classic Load Balancer: Instance registration.

After the state of at least one of your instances is InService, you can test your load balancer. To test your load balancer, copy the DNS name of the load balancer and paste it into the address field of an internet-connected web browser. If your load balancer is working, you see the default page of your HTTP server.

Step 7: Delete your load balancer (optional)

Deleting a the load balancer automatically de-registers its associated EC2 instances. As soon as the load balancer is deleted, you stop incurring charges for that load balancer. However, the EC2 instances continue run and you continue to incur charges.

To delete your load balancer, use the following delete-load-balancer command:

                                    aws elb delete-load-balancer --load-balancer-name              my-loadbalancer

To stop your EC2 instances, use the stop-instances command. To terminate your EC2 instances, use the terminate-instances command.